Encuentra los diferentes desarrollos tecnológicos, invenciones, materiales, casos de éxito, proyectos de investigación, capacitación… desarrollados por el equipo de AZTERLAN.
Towards the Prediction of Tensile Properties in Automotive Cast Parts Manufactured by LPDC with the A356.2 Alloy
Aluminum-silicon-magnesium alloys are commonly used in the automotive industry to produce structural components. Among usual quality controls of produced castings,
The effect of the substitution of Silicon by Aluminum on the properties of lamellar graphite iron
In cast iron, silicon and aluminum are elements that promote graphite precipitation and strengthen the alloy by solid solution. In
Casting Defects in Sand-Mold Cast Irons—An Illustrated Review with Emphasis on Spheroidal Graphite Cast Irons
Cast irons are known to be easy to shape by sand casting due to their high eutectic fraction. Despite this
Probing the correlation between corrosion resistance and biofouling of thermally sprayed metallic substrata in the field
The correlation between inherent corrosion resistance and biofouling was investigated for five different metallic coatings. Steel panels thermally spray-coated with
Tensile properties and fracture toughness at service temperatures of an optimized pearlitic ductile iron alloy for automotive crankshafts
Cast iron and forged steel have competed against each other for many years for different industrial applications. Crankshafts are one
Ablation technology applied to A356 alloys compared with conventional casting processes
Because ablation differs from conventional casting, some conventional metallurgical concepts, such as the relationship among secondary dendrite arm spacing (SDAS),
New scenario for high temperature performance materials and and components
This workshop (which was held online) gathered some of the latest research and innovation in the field of materials and
Estudio del efecto de inoculantes comerciales en la disminución de la micro-porosidad en componentes fundidos de hierro de alto silicio
Las aleaciones de alto silicio han vivido un significativo auge en los últimos años debido a que presentan una estructura
Effect of the magnesium treatment on the nucleation potential of ductile iron
It is well known that the metallurgical quality and nucleation potential of a cast iron are influenced by a series
Combustion of a Solid Recovered Fuel (SRF) Produced from the Polymeric Fraction of Automotive Shredder Residue (ASR)
The use of alternative fuels derived from residues in energy-intensive industries that rely on fossil fuels can cause considerable energy
New generation of digital material for automotive components
With the application of Industry 4.0 technology, a new generation of advanced materials is developing in the world of safety
Influence of Minor Alloying Element Additions on the Crack Susceptibility of a Nickel Based Superalloy Manufactured by LPBF
Inconel 738LC (IN738LC) is a nickel-based superalloy specially used in the hot section components of turbine engines. One of its
The Role of Selenium on the Formation of Spheroidal Graphite in Cast Iron
Sulfur, an element that belongs to group 16 (chalcogens) of the periodic table, is an excellent promoter of nucleation substrates
Modelización por diferencias finitas aplicada a la interpretación del agrietamiento asistido por hidrógeno utilizando ensayos virtuales de tracción a baja velocidad de deformación
Se han observado distintos patrones de agrietamiento inducido por hidrógeno en dos aceros pertenecientes al mismo grado para el fondeo
Improvement of the secondary aluminium metallurgical quality by means of an adequate melt treatment
This work has the purpose to demonstrate that if an adequate melt treatment is applied, it is possible to obtain
When is a Cast Iron Eutectic?
The literature often mentions that cast irons that appear eutectic by thermal analysis are hypereutectic if one refers to the