AZTERLAN
Knowledge Hub
Encuentra los diferentes desarrollos tecnológicos, invenciones, materiales, casos de éxito, proyectos de investigación, capacitación… desarrollados por el equipo de AZTERLAN.
¿Qué buscas?
Desarrollos y capacidades:
Diseminación:
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Retained Austenite Control for the Soft Machining of High-Hardness Tool Steels
Most high-hardness tool steels comprising forming dies require expensive finish machining operations to compensate for the dimensional distortion and surface
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
The Influence of Trace Elements on the Nature of the Nuclei of Graphite in Ductile Iron
Nucleation mechanisms and the effect of minor elements added with the inoculants are still a subject of extensive research in
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Reassessment of Crystal Growth Theory of Graphite in Cast Iron
The problem of graphite crystallization and growth in cast iron has recently received increased attention. As most of the published
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Evolution of shrinkage with carbon equivalent and inoculation in ductile cast irons
Studying how shrinkage porosity changes size when varying the composition of ductile irons is still of interest for manufacturing sound
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Effect of the Martensitic Transformation on the Stamping Force and Cycle Time of Hot Stamping Parts
Stamping dies perform two functions in the hot stamping process of body-in-white components. Firstly, they form the steel sheet into
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
A Simplified Varestraint Test for Analyzing Weldability of Fe-Ni Based Superalloys
High temperature Ni-based superalloys are largely used in components of aircraft engines which are subjected to high thermal (above 700
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Experimental and CFD Modeling of the Degree of Eutectic Modification in A356 Silica Sand and Metal-Mold Castings
A computational fluid dynamics (CFD) casting simulation-based optimization approach previously developed was applied in this study to assist in the
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Experimental and CFD Modeling of Microshrinkage in A356 Silica Sand Mold Castings
A computational fluid dynamics (CFD) casting simulation-based optimization approach previously developed was applied in this study to assist in the
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Wear and Friction Evaluation of Different Tool Steels for Hot Stamping
The aim of this work is to investigate the durability of tool steels for hot stamping by comparing the wear
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Effects of high silicon contents on graphite morphology and room temperature mechanical properties of as-cast ferritic ductile cast irons. Part II – Mechanical properties
In this second part of the investigation, room temperature mechanical properties and hardness evolution of cast irons with silicon contents
![Micro-hardness indent lines (column to the left) and corresponding evolution of HV (column to the right) in alloy #6 (3.94 wt% Si, top row) and in alloy #15 (5.70 wt% Si, bottom row).](https://www.azterlan.es/wp-content/uploads/2022/04/Part-2.png)
Effects of high silicon contents on graphite morphology and room temperature mechanical properties of as-cast ferritic ductile cast irons. Part II – Mechanical properties
In this second part of the investigation, room temperature mechanical properties and hardness evolution of cast irons with silicon contents
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Mechanical and microstructural characterization of HIP joints of a simplified prototype of the ITER NHF First Wall Panel
The blanket of ITER protects the vacuum vessel from neutrons and other energetic particles produced in the fusion plasma. Each
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Combined effects of cooper and tin at intermediate level of manganese on the structure and properties of as-cast nodular graphite cast iron
Copper, manganese and tin are commonly used as pearlite promoter elements in cast irons. A number of studies have been
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Reexamination of crystal growth theory of graphite in iron-carbon alloys
Most analysis of graphite morphology in cast iron-carbon alloys is performed on samples cooled to room temperature. This raises the
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Effect of Tin on the Phase Transformations of Cast Irons
Copper, manganese and essentially tin are used as alloying elements for obtaining cast irons with a fully pearlitic matrix in
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
On the Influence of Cryogenic Steps on Heat Treatment Processes
Although treatments at cryogenic temperatures have been known for decades, these processes are still far from being common in industry.