Encuentra los diferentes desarrollos tecnológicos, invenciones, materiales, casos de éxito, proyectos de investigación, capacitación… desarrollados por el equipo de AZTERLAN.
The effect of the substitution of silicon by aluminium on the mechanical properties of gray iron
Gray iron, a Fe-C-Si alloy, is one of the most common ferrous alloys used in the metal casting industry. Silicon
Efecto de las modificaciones en la composición de aceros de trabajo en caliente en su comportamiento a desgaste
En los últimos años se ha experimentado un aumento en la utilización de las tecnologías de recargue a partir de
Integration of a novel mechanical sand reclamation technology in a steel foundry to maximise SFS valorisation in foundry and construction applications
Spent Foundry Sand (SFS) generation is intrinsic to metal casting processes. Most of the foundries use sand moulds and cores
Solidification and Room Temperature Microstructure of a Fully Pearlitic Compacted Graphite Cast Iron
Compacted graphite cast irons are rapidly developing for they have better mechanical properties than lamellar graphite cast irons and present
Hydrogen Embrittlement Susceptibility of R4 and R5 High-Strenght Mooring Steels in Cold and Warm Seawater
Hydrogen embrittlement susceptibility ratios calculated from slow strain rate tensile tests have been employed to study the response of three
Retained Austenite Control for the Soft Machining of High-Hardness Tool Steels
Most high-hardness tool steels comprising forming dies require expensive finish machining operations to compensate for the dimensional distortion and surface
The Influence of Trace Elements on the Nature of the Nuclei of Graphite in Ductile Iron
Nucleation mechanisms and the effect of minor elements added with the inoculants are still a subject of extensive research in
Reassessment of Crystal Growth Theory of Graphite in Cast Iron
The problem of graphite crystallization and growth in cast iron has recently received increased attention. As most of the published
Evolution of shrinkage with carbon equivalent and inoculation in ductile cast irons
Studying how shrinkage porosity changes size when varying the composition of ductile irons is still of interest for manufacturing sound
Effect of the Martensitic Transformation on the Stamping Force and Cycle Time of Hot Stamping Parts
Stamping dies perform two functions in the hot stamping process of body-in-white components. Firstly, they form the steel sheet into
A Simplified Varestraint Test for Analyzing Weldability of Fe-Ni Based Superalloys
High temperature Ni-based superalloys are largely used in components of aircraft engines which are subjected to high thermal (above 700
Experimental and CFD Modeling of the Degree of Eutectic Modification in A356 Silica Sand and Metal-Mold Castings
A computational fluid dynamics (CFD) casting simulation-based optimization approach previously developed was applied in this study to assist in the
Experimental and CFD Modeling of Microshrinkage in A356 Silica Sand Mold Castings
A computational fluid dynamics (CFD) casting simulation-based optimization approach previously developed was applied in this study to assist in the
Wear and Friction Evaluation of Different Tool Steels for Hot Stamping
The aim of this work is to investigate the durability of tool steels for hot stamping by comparing the wear
Effects of high silicon contents on graphite morphology and room temperature mechanical properties of as-cast ferritic ductile cast irons. Part II – Mechanical properties
In this second part of the investigation, room temperature mechanical properties and hardness evolution of cast irons with silicon contents
Effects of high silicon contents on graphite morphology and room temperature mechanical properties of as-cast ferritic ductile cast irons. Part II – Mechanical properties
In this second part of the investigation, room temperature mechanical properties and hardness evolution of cast irons with silicon contents