Aurkitu AZTERLANeko lan-taldeak sortutako teknologiak, materialak eta diseminazio ekintzak.
Effect of the magnesium treatment on the nucleation potential of ductile iron
It is well known that the metallurgical quality and nucleation potential of a cast iron are influenced by
Combustion of a Solid Recovered Fuel (SRF) Produced from the Polymeric Fraction of Automotive Shredder Residue (ASR)
The use of alternative fuels derived from residues in energy-intensive industries that rely on fossil fuels can cause
New generation of digital material for automotive components
Ni-Cr-Si-Fe-B self-fluxing alloys are commonly used in hardfacing applications; in addition, they are subjected to conditions of wear,
Antifragile Philosophy in R&D Projects: Applying Q Methodology and the Possibility of Open Innovation
Antifragile philosophy can be the key to improving the management of organizations that base their activity on research
The Role of Selenium on the Formation of Spheroidal Graphite in Cast Iron
An attempt has been made to establish experimentally the temperature along the metastable eutectic in the Fe–C–Si system,
Influence of graphite morphology on the corrosion behaviour of cast irons for automotive industry
Cast irons are widely used in the automotive industry due to its excellent castability, fluidity, machinability and wear
Finite difference modelling for understanding the hydrogen assisted cracking in virtual slow strain rate tensile tests
Different hydrogen-induced cracking patterns have been observed on two construction steels belonging to the same strength grade for
Comparative study of the metallurgical quality of primary and secondary alsi10mnmg aluminium alloys
The use of secondary aluminium is increasingly being promoted in the automotive industry for environmental reasons. The purpose
Improvement of the secondary aluminium metallurgical quality by means of an adequate melt treatment
This work has the purpose to demonstrate that if an adequate melt treatment is applied, it is possible
When is a Cast Iron Eutectic?
The literature often mentions that cast irons that appear eutectic by thermal analysis are hypereutectic if one refers
Effect of the Type of Inoculant on the Shrinkage Porosity of High Silicon SG Iron
High-silicon spheroidal graphite (SG) irons present significant challenges to the production of sound castings as it is particularly
Correction to: 90 years of thermal analysis as a control tool in the melting of cast iron
Since its first literature mention in conjunction with cast iron in 1931 by Esser and Lautenbusch, thermal analysis
Weldability Evaluation of Alloy 718 Investment Castings with Different Si Contents and Thermal Stories and Hot Cracking Mechanism in Their Laser Beam Welds
In this work, weldability and hot cracking susceptibility of five alloy 718 investment castings in laser beam welding
Hot Stamping Research Scenarios from the Last Decade
Hot stamping technology has shown a significant scientific yield in the last decade. The research activity in that
Die Material Selection Criteria for Aluminum Hot Stamping
The aim of this work is to develop a die material selection criterion for aluminum hot stamping applications.
Nodule Count, End of Solidification Cooling Rate, and Shrinkage Porosity Correlations in High Silicon Spheroidal Graphite Iron
High-silicon spheroidal graphite (SG) irons present higher changes of density during the solidification process when compared to normal