Aurkitu AZTERLANeko lan-taldeak sortutako teknologiak, materialak eta diseminazio ekintzak.
New EoL Routes of Al-Li Aircraft Integral LBW and FSW Welded Panels including New Cr-Free Coatings
The end of fife (EoL) of new aircraft panels made of Al-Li alloys in which the stringers and
Embedded conductors in solidified molten metal for winding packs for high-field stellarators
The potential advantages of high-field stellarators are currently being recognised, as previously happened with tokamaks. However, the winding
Obtaining Perfect Critical Automotive Safety Components through Behavioral Monitoring and Simulation using Digital Twins
With the aim of obtaining the perfect component and manufacturing process without defects or claims, an ecosystem of
Evolution of the Metallurgical Quality of Spheroidal Graphite Iron during the Thermal Cycle of the Melt: Furnace – Ladle – Heating/Pouring Unit
The final properties of a ductile iron and its nucleation potential are determined by the different processes undergone
Damping behaviour of high silicon nodular cast iron
This work focused on producing and characterizing high silicon cast irons (microstructural analysis, tensile properties, damping capacity, elastic
Influencia del recubrimiento Zn-Ni en la resistencia del acero 300M estimada mediante Small Punch Testing
Egindako azterketaren helburu nagusia da Zn-Ni estaldura erabiltzea bideragarria den egiaztatzea, bai eta deshidrogenatze-prozesua burutzeko parametroak mugatzea ere.
Effects of Different Si Content and Thermal Stories on the Secondary Phase Formation, Hot Ductility, and Stress Rupture Properties of Alloy 718 Investment Castings
Herein, the effects of microstructure on high-temperature properties (hot ductility and stress rupture life) were investigated in alloy
Intermediate temperature brittleness of a high-silicon spheroidal graphite cast iron
The target of this research work was characterizing high temperature mechanical properties of an as-cast ferritic HiSi SGI.
Influence of the shielding gas in laser metal deposition of AISI 316L
Shielding gases are a must in metal additive manufacturing. Consequently, their influence on the materials employed in technologies
L-DED numerical model for sensor embedding
Sensor integration is one of the drivers in modern industry for obtaining real-time data and enabling transition to
An adaptive approach to non-destructive evaluation (NDE) of cast irons containing precipitated graphite particles with the help of magnetoacoustic emission
Physical properties of cast irons strongly depend on both their microstructure and the presence of casting defects. The
An Objective Metallographic Analysis Approach Based on Advanced Image Processing Techniques
Metallographic analyses of nodular iron casting methods are based on visual comparisons according to measuring standards. Specifically, the
Influence of the casting process on corrosion behaviour of 2024-T6 aluminium alloy in different conditions of pH and NaCl concentration
Corrosion behaviour of 2024-T6 castings produced by sand mould and metallic mould has been studied in media with
Metastable versus stable solidification of silicon cast irons, effects of magnesium and tellurium
Cast iron is a material with a unique combination of design flexibility, mechanical properties, wear resistance, recyclability, low
Friction Stir Weldability at High Welding Speed of Two Structural High Pressure Die Casting Aluminum Alloys
In this work, the friction stir weldability of two structural high-pressure die casting aluminum alloys designed to manufacture
New Approach to Develop Ductile Cast Iron Digital Grade for Automotive Components
This research work demonstrates that new cast iron materials can be developed aided by an expert digital twin