Aurkitu AZTERLANeko lan-taldeak sortutako teknologiak, materialak eta diseminazio ekintzak.
Effect of Carbon Equivalent on Graphite Formation in Heavy-Section Ductile Iron Parts
The influence of post-inoculation and of cerium and antimony additions on the solidification process and on the formation
Experimental investigation of chunky graphite formation in small-section ductile iron castings
The formation of chunky graphite has generally been related to the thermal centre of heavy – section iron
Thermal analysis applied to estimation of solidification kinetics of Al-Si aluminium alloys
Evaluation of solidification kinetics by thermal analysis is a useful tool for quality control of Al–Si melts before
Control del contenido de carbono a lo largo del proceso de fabricación de discos de freno de alto carbono
Las propiedades físicas de los discos de freno de alto carbono se encuentran fuertemente afectadas por el contenido
Effect of antimony on the eutectic reaction of heavy-section spheroidal graphite castings
There is a strong demand for heavy section castings made of spheroidal graphite with a fully ferritic matrix,
Results prediction in industrial processes. A control tool based on the Knowledge
The difficulties involved in most metallurgical processes are well known, specially when the number of factors that act
Thermal analysis of the formation of chunky graphite during solidification of heavy-section spheroidal graphite iron parts
Analysis of cooling curves recorded at the centre of large blocks cast with near-eutectic spheroidal graphite cast irons
Effect of antimony and cerium on the formation of chunky graphite during solidification of heavy-section castings of near-eutectic spheroidal graphite irons
Thermal analysis is applied to the study of the formation of chunky graphite (CHG) in heavy-section castings of
Efficient failure-free foundry production
A Model Predictive Control (MPC) is a system designed to control a production plant. These systems are composed
Desarrollo de un software para la predicción de la densidad grafítica y el riesgo de formación de Grafito Chunky en piezas de módulo térmico elevado
Durante los últimos años el sector eólico ha experimentado un gran desarrollo, proponiendo nuevos retos a las empresas
Influence of treatments using different magnesium ferroalloys on the melt quality and the solidification processes of ductile of ductile irons
In this work the metallurgical consequences of treatments applied on ductile irons using ferroalloys with differentmagnesium contents are
Advanced fault prediction in high-precision foundry production
Microshrinkages are known as probably the most difficult defects to avoid in high-precision foundry due to the large
Advanced predictions tools, foundry process control and knowledge management for irons castings
It is well known that the large number of variables that interact during the foundry process bring about
Metallurgical defects generated by the presence of gases in the molten metal
The study of the metallurgical evolution of different chemical elements related to the manfuacture of poured casting provides
Iron castings Advanced prediction tools, foundry process control and knowledge management
It is well known that the large number of variables that interact during the foundry process bring about
A Computer-Aided System for Melt Quality and Shrinkage Propensity Evaluation Based on the Solidification Process of Ductile Iron
The present work develops a new method for pre-evaluating melt quality of ductile irons and for predicting their