Aurkitu AZTERLANeko lan-taldeak sortutako teknologiak, materialak eta diseminazio ekintzak.
Effect of Carbon Equivalent and Alloying Elements on the Tensile Properties of Superfine Interdendritic Graphite Irons
Recently, it was demonstrated that the tensile strength of gray iron of average 4% Carbon Equivalent can be
Kinetics of graphite expansion during eutectic solidification of cast iron
The paper introduces a new linear displacement analysis (LDA)/thermal analysis (TA) experimental device for measuring linear displacement during
Interface characterization of aluminium casting reinforced steel inserts
During the last years, new technologies have been developed in order to reduce the environmental pollution and preserve
Graphite and Solid Fraction Evolutions during Solidification of Nodular Cast Irons
Ductile iron casting production is strongly affected by austenite and graphite distribution obtained after the solidification process. At
As-cast high silicon ductile irons with optimised mechanical properties and remarkable fatigue properties
The present work shows a comparative study regarding the mechanical properties of 25 as cast ferritic ductile iron
As cast high silicon ductile irons with optimised mechanical properties and remarkable fatigue properties
The present work shows a comparative study regarding the mechanical properties of 25 as cast ferritic ductile iron
As Cast ductile iron Crankshafts with improved mechanical properties
Current understanding about the influence of several alloying elements on mechanical properties of steels and cast irons and
Ductile iron castings fabricated using metallic moulds
The features and suitability of high requirements ductile iron castings production using metallic moulds have beenstudied in the
Estruktura ausferritikoak hozte kontrolatuaren bitartez
La fundición esferoidal con matriz ausferrítica, posee propiedades mecánicas superiores a las aleaciones ferrítico/perlíticas convencionales. Tomando como base
Comparative Study of Different Interfaces of Steel inserts in Aluminium Castings
The necessity of preserving resources and to reduce environmental pollution makes light weight concepts highly interesting for the
Investigation on the Effect of Sulfur and Titanium on the Microstructure of Lamellar Graphite Iron
The goal of this work was to identify the inclusions in lamellar graphite cast iron in an effort
Waste From Metallurgic Industry: A Sustainable High-Temperature Thermal Energy Storage Material
The ambitious DOE SunShot cost target ($0.06/kWh) for concentrated solar power (CSP) requires innovative concepts in the collector,
Redistribution and Effect of Various Elements on the Morphology of Primary Graphite in Cast Iron
It has been shown repeatedly that many elements present as traces or at low level can affect graphite
Supervised learning classification for dross prediction in ductile iron casting production
Foundry is one of the key axes in society because it provides with important pieces to other industries.
Study of the Effect of Cooling Rate on Eutectic Modification in A356 Aluminium Alloys
In this present work, an assessment of eutectic modification based on thermal analysis was performed on modified A356
Statistical Analysis of the Influence of Some Trace elements on Chunky Graphite Formation in Heavy Section Nodular Iron Castings
To study the formation of chunky graphite (CHG) in heavy section castings, 68 nodular cast irons of both