Find out the technological developments, inventions, new materials and dissemination activities developed by the AZTERLAN team.
Effect of selected alloying elements on mechanical properties of pearlitic nodular cast irons
There is a continuous demand for low-cost nodular cast irons with improved mechanical properties, this being an industrial requirement both
Microstructure investigation of small section nodular iron castings with chunky graphite
Parameters that affect chunky graphite formation in heavy-section castings have been studied in previous works which showed that inoculation and
Mechanical properties optimization of alloys AlSi7Mg casting in sand moulds
MechanicalpropertiesoptimizationofalloysAlSi7MgcastinginsandmouldsAbstractIn the present work the mechanical properties of the alloy AlSi7Mg were studied in order to choose a suitablecomposition and
Experimental investigation on the effect of copper upon eutectoid transformation of as-cast and austenitized spheroidal graphite cast iron
Copper is known as a pearlite promoter in cast iron and has been used as such for a long time,
Thermal analysis as a microstructure prediction tool for A356 aluminium parts solidified under various cooling conditions
Thermal analysis performed with standard cups has been used since decades for melt control and microstructure prediction before casting aluminium
Thermal and structural studies about the solidification process of grey cast irons
The grey iron casting manufacture is an industrial process extendly used today. Therefore, the study of the solidification features obtained
Comparison of thermal analysis and differential thermal analysis for evaluating solid fraction evolution during solidification of Al-Si alloys
Both thermal analysis (TA) and differential thermal analysis (DTA) have been used since long to evaluate latent heat release and
Carbon content control during the production process of high carbon brake discs
The physical properties of high carbon brake discs are strongly affected by the content of this element, including the ability
Effect of Carbon Equivalent on Graphite Formation in Heavy-Section Ductile Iron Parts
The influence of post-inoculation and of cerium and antimony additions on the solidification process and on the formation of chunky
Thermal analysis applied to estimation of solidification kinetics of Al-Si aluminium alloys
Evaluation of solidification kinetics by thermal analysis is a useful tool for quality control of Al–Si melts before pouring provided
Control of carbon content throughout the manufacturing process of high carbon brake discs
The physical properties of high carbon brake discs are strongly affected by the content of this element, including the ability
Effect of antimony on the eutectic reaction of heavy-section spheroidal graphite castings
There is a strong demand for heavy section castings made of spheroidal graphite with a fully ferritic matrix, e.g. for
Effect of antimony and cerium on the formation of chunky graphite during solidification of heavy-section castings of near-eutectic spheroidal graphite irons
Thermal analysis is applied to the study of the formation of chunky graphite (CHG) in heavy-section castings of spheroidal graphite
Efficient failure-free foundry production
A Model Predictive Control (MPC) is a system designed to control a production plant. These systems are composed by several
Desarrollo de un software para la predicción de la densidad grafítica y el riesgo de formación de Grafito Chunky en piezas de módulo térmico elevado
Durante los últimos años el sector eólico ha experimentado un gran desarrollo, proponiendo nuevos retos a las empresas productoras de
Advanced fault prediction in high-precision foundry production
Microshrinkages are known as probably the most difficult defects to avoid in high-precision foundry due to the large number of